I’m not so sure. But maybe you’re right. I think I was confusing that with tonnage of a ship. But that’s a whole other concept and you can’t really confuse the two.
With the 1000 t thats only because kg is a stupid SI unit and leads to the whole debacle. If there wasn’t a prefix in the unit name itself, I think people would have started to use the SI unit prefixes correctly at some point instead of inventing and omitting other names to compensate.
I think I’ve heard things like megatonne. For example you can say your nuclear bomb has X megaton tnt equivalent.
A mass of a million kg should be 1 gigagram or 1 kilotonne. Not 1000t. (Edit: And not a kilotonne either, rather a mega-kilogram.)
The official definition of a 1,000 kg is Mg but it’s not very frequently used in practice. Mostly because use of metric tonnes was already diffused
Keep in mind that there is more than just SI units used in Europe in the past. For example if you read through an old thermodynamics textbook in Italian it is likely to use a lot calories and often the CGS system (centimeter grams second and calories).
Sure. I’ve grown up with that stuff, too. And we also get our weather forecast in celsius each day… You don’t even have to open an old textbook for that.
CGS system (centimeter grams second and calories).
For the pleasure to be pedantic, the proper CGS energy unit is the erg, not calorie.
But indeed, even in France, home of the metric, you’ll find people using some customary unit (Calories, or pounds) and even some US units like inches for computer-screen and feet for powered airplanes altitude, and then a shit ton of approximation
But it literally is a kiloton? Mostly getting used for explosives if you talk about it, but it’s used:
kiloton /ˈkɪlə(ʊ)tʌn/
noun: kiloton; plural noun: kilotons; noun: kilotonne; plural noun: kilotonnes
a unit of explosive power equivalent to 1,000 tons of TNT.
The reason megagram isn’t used much is because it would be shortened to mg. Which is usually milligram. Sure, you could go the “Mg” route compared to “mg”, but that sucks. So “t” for ton works well. It’s just another name though, it doesn’t matter.
Yeah, I know. But you have the problem with the letter ‘m’ everytime. You just have to pay attention and write it correctly. And there is also ‘micro-’ in addition to the ‘milli’ and ‘mega’ you mentioned. However, most of the time it’s unlikely you’re off by a factor of 1 billion and won’t notice. Just do it right: 'µ, ‘m’, ‘M’. (Also there are other letters like the ‘p’. But there’s an even bigger difference between those two.)
If you listen to my school teacher, you’re not supposed to use SI prefixes with other things. I think that’s not true but would apply to the ‘kiloton’. People wouldn’t like me talking about a ‘kilo-foot’ or ‘milli-yard’… I’ve had 3 deca-spoons of soup or there were 2.5 kilo-people at the concert… It took me 15 milli-days to finish the task… What? 1k8 euros for a graphics card?
I don’t think there is a clear line. The SI unit system is good. But we still have plenty things that aren’t a certain way because of history and ‘reasons’.
A mass of a million kg should be 1 gigagram or 1 kilotonne. Not 1000t. (Edit: And not a kilotonne either, rather a mega-kilogram.)
The good thing: All of them are correct. The SI system actually does not care if you throw around extra zeros, so 1000t is fine. It is actually better to stay in the same SI prefix and just use larger numbers to make list entries easier comparable. Just imagine some ship shop would list it’s smaller offers in Mg and then switch to Gg for larger ships.
If you take the context away: When you learn that in school, it’s pointed out as a mistake if you write 10 000m. You should have converted that into 10km to get a perfect score.
But there are certainly contexts where it makes sense to stay with one prefix. For example if you write things into a table. Or when your number is basis for a calculation that surely ends you up in the next bigger or smaller realm of numbers.
I’m not sure if it’s necessarily the case for comparing stuff… It’s kind of rare that you have things that are a factor of 10000 or a million apart, so it’s kind of difficult for me to find examples. But I have capacitors that are 470uF or 22pF and resistors that are 220 Ohm or a Mega-Ohm or 150kOhm. They’re all wired into one circuit.
I know how to handle that and switch between all of them. So people do switch and that’s kind of the point of having those prefixes. If I type things like that into my calculator, I use scientific notation and after the calculation I use the special key to find me the closest power of ten. I forgot the name of that key. ‘E’ or ‘ENG’. It makes it very easy, you just type in 470e-6 or 22e-9 and it figures it out for you, no matter how convoluted. You need to remember your powers of ten, but you already do that for at least half of them. I think most people know how many zeros are in a million or a thousand.
On the other hand, if i say I’m dividing the road into sections of 100m, im not going to say I’m dividing 2km into 100m sections, but 2000m.
The ‘offerings’ example is good. Because for example internet providers are all over the place. I’ve had a 16000 dsl line, 16Mbit is the same, and nowadays there is anything between 50 to 1000Mbit/s and some advertise it as 1000Mbit, some as a Gigabit line. But they want to sell stuff, not do maths correctly…
If you take the context away: When you learn that in school, it’s pointed out as a mistake if you write 10 000m. You should have converted that into 10km to get a perfect score.
Only if this was explicitly demanded. If the teacher doesn’t, and then claim 10000m is “wrong”, the teacher is wrong.
I think I had a strict maths teacher. But they told us upfront how to convert units and how to do the rounding. So there were no ambiguities.
But I’ve also come to the conclusion that humans can handle numbers up to the ten or hundred thousands as well. We mostly do that instead of converting past kilo. And even textbooks say the sun is on average 150 million kilometers away.
It’s typically shortened as t. So a mass of 1,000,000 kg will be referred as 1,000 t
Normally it’s clear from the context and what units you are using so there is no ambiguity.
I’m not so sure. But maybe you’re right. I think I was confusing that with tonnage of a ship. But that’s a whole other concept and you can’t really confuse the two.
With the 1000 t thats only because kg is a stupid SI unit and leads to the whole debacle. If there wasn’t a prefix in the unit name itself, I think people would have started to use the SI unit prefixes correctly at some point instead of inventing and omitting other names to compensate.
I think I’ve heard things like megatonne. For example you can say your nuclear bomb has X megaton tnt equivalent.
A mass of a million kg should be 1 gigagram or 1 kilotonne. Not 1000t. (Edit: And not a kilotonne either, rather a mega-kilogram.)
The official definition of a 1,000 kg is Mg but it’s not very frequently used in practice. Mostly because use of metric tonnes was already diffused
Keep in mind that there is more than just SI units used in Europe in the past. For example if you read through an old thermodynamics textbook in Italian it is likely to use a lot calories and often the CGS system (centimeter grams second and calories).
Sure. I’ve grown up with that stuff, too. And we also get our weather forecast in celsius each day… You don’t even have to open an old textbook for that.
For the pleasure to be pedantic, the proper CGS energy unit is the erg, not calorie.
But indeed, even in France, home of the metric, you’ll find people using some customary unit (Calories, or pounds) and even some US units like inches for computer-screen and feet for powered airplanes altitude, and then a shit ton of approximation
But it literally is a kiloton? Mostly getting used for explosives if you talk about it, but it’s used:
The reason megagram isn’t used much is because it would be shortened to mg. Which is usually milligram. Sure, you could go the “Mg” route compared to “mg”, but that sucks. So “t” for ton works well. It’s just another name though, it doesn’t matter.
Yeah, I know. But you have the problem with the letter ‘m’ everytime. You just have to pay attention and write it correctly. And there is also ‘micro-’ in addition to the ‘milli’ and ‘mega’ you mentioned. However, most of the time it’s unlikely you’re off by a factor of 1 billion and won’t notice. Just do it right: 'µ, ‘m’, ‘M’. (Also there are other letters like the ‘p’. But there’s an even bigger difference between those two.)
If you listen to my school teacher, you’re not supposed to use SI prefixes with other things. I think that’s not true but would apply to the ‘kiloton’. People wouldn’t like me talking about a ‘kilo-foot’ or ‘milli-yard’… I’ve had 3 deca-spoons of soup or there were 2.5 kilo-people at the concert… It took me 15 milli-days to finish the task… What? 1k8 euros for a graphics card?
I don’t think there is a clear line. The SI unit system is good. But we still have plenty things that aren’t a certain way because of history and ‘reasons’.
I think it’s mostly down to the fact the units could be mixed when written down.
Mg and mg should not create confusion in theory the standard milion prefix in metric is a capital M.
The good thing: All of them are correct. The SI system actually does not care if you throw around extra zeros, so 1000t is fine. It is actually better to stay in the same SI prefix and just use larger numbers to make list entries easier comparable. Just imagine some ship shop would list it’s smaller offers in Mg and then switch to Gg for larger ships.
Hmm, halfway…
If you take the context away: When you learn that in school, it’s pointed out as a mistake if you write 10 000m. You should have converted that into 10km to get a perfect score.
But there are certainly contexts where it makes sense to stay with one prefix. For example if you write things into a table. Or when your number is basis for a calculation that surely ends you up in the next bigger or smaller realm of numbers.
I’m not sure if it’s necessarily the case for comparing stuff… It’s kind of rare that you have things that are a factor of 10000 or a million apart, so it’s kind of difficult for me to find examples. But I have capacitors that are 470uF or 22pF and resistors that are 220 Ohm or a Mega-Ohm or 150kOhm. They’re all wired into one circuit. I know how to handle that and switch between all of them. So people do switch and that’s kind of the point of having those prefixes. If I type things like that into my calculator, I use scientific notation and after the calculation I use the special key to find me the closest power of ten. I forgot the name of that key. ‘E’ or ‘ENG’. It makes it very easy, you just type in 470e-6 or 22e-9 and it figures it out for you, no matter how convoluted. You need to remember your powers of ten, but you already do that for at least half of them. I think most people know how many zeros are in a million or a thousand.
On the other hand, if i say I’m dividing the road into sections of 100m, im not going to say I’m dividing 2km into 100m sections, but 2000m.
The ‘offerings’ example is good. Because for example internet providers are all over the place. I’ve had a 16000 dsl line, 16Mbit is the same, and nowadays there is anything between 50 to 1000Mbit/s and some advertise it as 1000Mbit, some as a Gigabit line. But they want to sell stuff, not do maths correctly…
Only if this was explicitly demanded. If the teacher doesn’t, and then claim 10000m is “wrong”, the teacher is wrong.
I think I had a strict maths teacher. But they told us upfront how to convert units and how to do the rounding. So there were no ambiguities.
But I’ve also come to the conclusion that humans can handle numbers up to the ten or hundred thousands as well. We mostly do that instead of converting past kilo. And even textbooks say the sun is on average 150 million kilometers away.