Silk tougher than Kevlar thanks to genetically modified silkworms::Researchers in China have successfully genetically modified silkworms to produce spider silk. The silk fibres produced were 6 times tougher than the Kevlar used in bulletproof vests.

  • AlexWIWA@lemmy.ml
    link
    fedilink
    English
    arrow-up
    70
    ·
    edit-2
    1 year ago

    For anyone else that isn’t an engineer and also doesn’t know, toughness is a defined term in material science.

    Toughness is the ability of a material to absorb energy and plastically deform without fracturing. One definition of material toughness is the amount of energy per unit volume that a material can absorb before rupturing. It is also defined as a material’s resistance to fracture when stressed.

    Sounds like it’d work better than kevlar for armor.

    I thought the article was being lazy by saying “tougher” but TIL that’s the scientific term.

    • Puzzle_Sluts_4Ever@lemmy.world
      link
      fedilink
      English
      arrow-up
      25
      arrow-down
      2
      ·
      1 year ago

      Its arguable if that would actually be more effective.

      Kevlar is already sufficient for small caliber. And even if the material itself is stronger, you still want it to be thick because the impact of that bullet is going to go somewhere… A few of the “I made a John Wick suit” youtubes have touched on this where the bullet is stopped but the dummy is REALLY dented in that spot.

      And if we are talking higher caliber rounds? You pretty much need the metal/ceramic/whatever plate

      So there might be small niche cases where this would be better for armor. But I doubt there are many situations where a “naturally made” product by genetically modified animals beats out a chemical process for cost and volume.

      • Notorious_handholder@lemmy.world
        link
        fedilink
        English
        arrow-up
        9
        ·
        1 year ago

        I think it’s more practical in terms of being used for layering with kevlar to reduce overall weight of a piece of body armor. While at the same time making it cheaper and more cost effective than traditional body armor materials as mentioned in the article.

        So rather than this being used as an upgrade to kevlar (which with more testing it might be able too) it’s more like a side grade to reduce costs, as mentioned in the article silkworm silk is already used on a commercial and industrial level for other applications.

        Granted it’ll probably be a good few years before the silk being made by these genetically modified worms is both made consistently and is more refined with further testing and then distributed. But still it’s something that material scientists will likely put to good use for reducing costs in lots of fields.

      • shastaxc@lemm.ee
        link
        fedilink
        English
        arrow-up
        3
        ·
        1 year ago

        I’m thinking this silk may just be a new layer to armor, or just part of a new type of ____.

      • Fondots@lemmy.world
        link
        fedilink
        English
        arrow-up
        3
        ·
        1 year ago

        I don’t know the material science so I may be a bit off base, but but since kevlar is a synthetic fiber I’m assuming it’s made from petrochemicals and probably a source of microplastic pollution. So there’s probably an environmental aspect to consider. Even if it’s not actually more effective for it’s role, the fact that it’s tougher could be a useful marketing buzzword to get people to switch who wouldn’t care about the environmental impact and maybe even justify an inflated price.

        Also while body armor is probably by far the best known use for kevlar it does have other uses like in composite materials in a similar fashion to things like fiberglass. Shaving a couple ounces off a part that might otherwise have been made of kevlar by switching to silk might be attractive to certain fields, maybe we’d see high end racing sailboats with silk sails or something (not that I think that’s a very important use, but for some reason I know some boats have kevlar sails so that came to mind)

    • mosiacmango@lemm.ee
      link
      fedilink
      English
      arrow-up
      6
      ·
      edit-2
      1 year ago

      A lot of great terms in material science.

      Brittle fracture is the point at which a material breaks instead of deforming. A material that deforms instead of breaking with stress, like bubble gum, has high “Ductility.” It doesnt retain its original shape, but it doesnt fracture.

      Strength is the ability for something to withstand stress.

      Metal generally has high hardness, good strength and at least some ductility. It will generally absorb and bend to stress, if it bends at all.

      Something like Glass has low ductility, low strength and low hardness. It’s very solid up to the point of brittle fracture, but once it happens it shatters.