I decided to eq a pair of $30 intime sora 2019 light iems which use a piezoelectric driver in a tiny shell to match my favourite iem the yanyin x hbb mahina, a higher end $650 tribrid, using a iec711 clone mic and a qudelix 5k
People make it seem like it isn’t possible for them to sound similar and claim “frequency response isn’t everything”, " you can’t fix this and that with eq" etc, I get that it’s physically impossible to make them identical, but I felt like they could get close
After eq the sound signature was almost identical to the point i’d forget which pair I was listening to when going back and forward and simply just enjoying listening to the music, of course when you really pay attention you can hear the quality difference, but it gets WAY closer than people would have you believe and if you’re simply listening to music for the music it’s more than adequate
The sora’s sounded all wrong beforehand and I simply put it down to the fact it uses a piezo driver in a tiny shell, but eq really did “fix” the way they sound, i’m sure you can’t fix every iem with eq but if a $30 piezo iem can suddenly sound warm lush and open like the mahinas i’d definitely be weary of people claiming frequency response isn’t everything
Of course I do expect people to disagree, “ackshually the 3rd harmonic of the piezo causes the roll off of the cymbal strike at 5:34 in this particullar song to sound sligtly incorrect ruining the song entirely and causing me migranes 🤓”
I personally use the sora’s when riding my bike, the tiny shell minimizes the amount of wind turbulance woosh noise, and since i’m not fully focused on the music when riding I don’t notice the quality difference and can have my favourite iem sound with no risk of breaking an actual expensive pair
god i love this hobby
Nah man, not even gonna type a long paragraph. If you get a chance to listen to expensive iems you really should. Then you would completely understand why people are telling you that.
David D. and Justin K. already wrote a very influential paper on exactly the topic of your post back in 1999
I am not saying you are wrong. But I think you hit the head on why Audiopilia as a hobby tends to have a lot of snake oil issues. There is a lot of Emporer’s new cloths going on even not counting the straight up miss information. A lot of what makes a lot of Audiophile headphones sound so good, is straightup the tuning and as much as I am not a fan of having to worry about getting the perfect EQ and finding a way to make sure I have it on every device I am using and probably for lets say 3 headphones (1 TWS, 1 Over the ear, and 1 IEM). But once you hit a decent responce graft everything after that is pretty much diminishing returns.
But that is where I think you fall out of being an audio phile. If its not about getting more out of your listening and not just geting away from bloated, veiled, tinny run of the mill headphones then you are missing a lot of nuance. For most people that is probably fine. But there is something to soundstage, there is something about detail, there is something about a driver (or drivers) that can capture the nuance of all the components of the audio when you get to a really full part. There is something about different headphones and what changes to the tune do to make your particular track pop in a way that it wouldn’t with another headphone. Sure some of that can be recaptured by an EQ, but now you have to store and swap between not only different outputs, different headphones, but now also different eq’s for the niche you are listening to.
So not trying to gatekeep. But getting a good tune out of your headphones even the cheapest of the cheap is part of the game, the most important part of the game, its not all of it.
Also just for an anecdote and this probably goes away well before people think it goes away. Before getting into this hobby, I was fine with my old TWS. Then I got some Jabra Elite 85s as a present. They were miles better, as my old ones were bloated and muddy. I couldn’t even eq them to sound as horrible in comparison if I tried. Then I sought better, probably rose from the ranks a little two quick. Then one day I was listening to Dan’s Audio reviews with one where he was comparing the Chu, a professionally tuned, economy priced IEM ($20). The tune being very comparable to their more expensive units like the Aria or Kato. But you could tell when listening to it, that the driver was struggling that it couldn’t keep up even if its frequency was in line with more expensive headphones. That doesn’t mean more expensive is always better or even the driver configuration matters as much as the mfgs imply it does, but it doesn’t mean you can get away with getting the absolute cheapest and it will sound like whatever you want it to with an EQ. Also some drivers are more accepting of a EQ then others.
Not sure how you came to the conclusion that someone with high end iems and a mic specifically for them ISN’T an audiophile lol, and idk why you’re trying to prove that high end is better, when my post doesn’t try and say they’re not? I said the sora’s quality is worse when you actually listen for it? all i’m saying is it gets closer than elitist audiophile people claim, frequency response is 95% of the picture, you don’t need to spend big money for something to sound good
Ya, eq isn’t fixing dog shit, my man.
Can’t make my iSine to sound as good as my i4.
So yeah, no.Probably you just have more tolerance, which is good. Saves money.
And then you have people saying use EQ to match cheap iem $30 against $650 iem. Sure. This hobby is subjective.
But imagine using the cheap iem when riding a bike and then claiming it’s a match against higher IEM. At that point, it’s just impossible to make a fair judgement as you claim that there is much wind noise and you can’t focus on the music.
You tuned a shitty sounding IEM to sound decent. That’s it
Dark secrets of audio revealed. Go to the oratory sub and ask about it, it comes up there often enough. The copes people go through to imagine a world in which EQ can’t bring most headphones into a reasonably audible match - Audibly indifferent in a lot more cases than any Head-Fi person wants to admit - are staggering. Obviously there’s some things that can’t be reproduced headphone to headphone but you can get damn close with a lot of them.
IEMs being the easiest to do this with. Sorry folks.
This is why I have two modes in the hobby. I have my very science-minded measurement obsessed minmax approach where I’m bringing everything to Harman and EQ is the alpha and the omega and I waste not a cent on frivolous audio jewelry and I know amps are the same and DACs are blah blah blah side
And then the side where I like listening to random headphones and IEMs without any EQ to hear some interesting signatures. I want to hear them as they were designed. Imperfectly. With shitty metrics and mistakes. With dumb bass and treble I know was a design error. Dig through the budget realm looking for gems. Try older pairs that I know have a FR that’s looks like a serial killer taking a detector test and see if I like the sound. I buy pretty boxes that cost more and do the same as ugly boxes. I knowingly engage in “bad” audio habits counter to the community standards. Because it’s fun. And hobbies are supposed to be fun.