Today I did my first 20 mile (33km) ride on my hardtail XC bike. I learned how to ride a bike about 1.5 months ago, but I’ve been riding pretty consistently since I learned. I ride exclusively in the city, it’s a very walkable city, but the paths aren’t always the best. I did 33km in 2 hours 53 minutes, not including breaks for water or to eat.
I see people saying that 10MP/H (16KM/H) average is a good average to shoot for, but i can’t even get my average above 7.1MPH (11.5KM/H), even on shorter rides. What am I doing wrong here? How are people going so freaking fast on bikes in cities?
I’ve gone down stairs, but only the kind that are sort of long (as in three stairs, but the space between the stairs is long as opposed to the three stairs being one after the other. It is pretty scary as I have trouble getting over the back wheel (maybe my saddle is too wide?The reviews I read about the bike said the saddle that came with it was terrible, so I’ve been riding on this saddle).
Looks like the seatpost may be backwards, so you might be sitting closer to the handlebars and bottom bracket than you should be. Can you give us a picture from another angle, from behind and lower?
I put the bike together myself out of the box, so that’s certainly possible.
Yeah, you should remove the saddle and turn that thing around, then re-attach the saddle pretty much level. I would not want to spend more than half an hour sitting on that setup. You may be able to simply loosen the nut and turn the part that is currently clamping the seat post 180 degrees to the front, no need to remove the saddle from the clamp.
Rule of thumb is this: If you turn the pedals to a horizontal position (let’s say the left one facing forward), the part of the leg just below your kneecap should be pretty much perpendicular to the pedal’s axis. If your saddle is too far forward or backward, you will not be able to pedal efficiently. It’s probably part of the reason why you cannot go very fast since you’re unable to use the leverage of the crank arms that way.
About saddle height: If your saddle height is correct, you can turn one pedal to its lowest point and place your heel on it. If your leg is then just slightly bent (shouldn’t be straight, but not a significant angle either), you’re probably pretty spot on.
As an avid cyclist, I can say that those are just pretty good rules of thumb. With my experience as a rider, pretty minor adjustments make a big difference and I tweak new bikes or parts as I go based on how it feels. I also learned from bad experience (knee and achilles heel problems from too high a saddle, for instance), so what I wrote above is a good starting point for you until you start getting a feel for such things with more kilometers under your belt. Welcome to the club, champ!
I think it’s more likely your saddle is too high or your handlebar reach is too long.
Saddle seems to be the right height according to the basic fit test I’ve seen (pedaling with heel should have almost full knee lockout. Could be my handlebar reach is too long, especially considering I had my handlebar sweep upside down until a kind person here pointed that out to me :D