It’s a painted finish. The areas that are peeling are exactly where you go to grab it if you pick it up. Look at the finish on anything subject to wear and tear and see if it is without blemish after 4.5yeard handling . Give me like an hour to get to the office and I’ll post a picture of a pair of focal elears that has had about 6hrs seated desk use, every day, since they were bought for daily use in 2016/17.
Tldr - wear and tear is individual use case. Op has had snaps, chips etc but given zero context of use, so this witch-hunt circle jerk you’re all jumping on is pretty naive.
Atleast use like a few layers of painting or atleast a more durable paint, I mean its sprayed on a pure black plastic background so when marks do appear they really noticable. Ive always handled these like a baby they look like snaps,chips on the corners but theyre not, its just the paint that came of and gives it that look in the corners.
most do on all headphones to varying degrees depending on what you’re doing to them. once its sat on your actual head are they doing it cos neither my focal elears or utopias do it on my head. the last lot of hd600’s i had creaked if you twisted them enough.
hd600 creak site:www.reddit.com
gives 715 threads.
Or am I just delusional?
yes and no, imo. you’re 4.5 years in so yes. i would not expect anything painted onto another non porous surface that is subject to manual handling to be issue free after 4.5 years. if this happened within a few weeks or months, then absolutely not ok.
As I said previously both the XLR and 3.5mm cables broke within a month
out of interest, how did they? what action caused the snap cos that would certainly piss me off.
camera isn’t really picking up the minor scratches and scuffs. but these headphones literally go on my head for 6hrs, then are placed down much as they are in the pictures until they’re next used. they’re not painted so they’re nothing to chip.
The creaking isnt my biggest issue with them. The cables itself just felt cheaply made and would tangle constantly. So its been like 4 years that i’ve been using a custom cable and never looked back since. You have the Focal Elear so it seems theyre not painted as I cant see any chips… Its not like I have much knowledgde on how these headphones are built, but why would you use black plastic earcups and put a layer of silver paint over them. I have no clue how they sprayed these. But wouldnt it be wise to first give them like a primer layer and then like 2 finished layers? So its atleast thicker and harder to break down? Cuz the coat on this is like 1/10th of a mm. I just think they’ve could done better at that area. I might be mistaken but who knows… I will still rock them. Im not trying to sound like a jerk.
So its been like 4 years that i’ve been using a custom cable and never looked back since
oh i thought you meant the actual connectors snapped, not the cable. they should do better yes and i’m guilty of just accepting that cables that are supplied by certain manufacturers are just shit cos they know the buyer will just use their own cable.
But wouldnt it be wise to first give them like a primer layer and then like 2 finished layers?
i hope someone else can chime in here as i think this might be wrong, but i think the thicker the layer of paint, the more likely you are to get cracking and then chips forming?
ideally focal should have made their own plastic cup in the colour they wanted instead of just painting the existing parts. so that’s a compromise i’d hope to not see on a premium product.
it’s shouldn’t be a painted finish. everything is subject to wear and tear. it’s also subject to design and engineering. that’s why it shouldn’t be used by makers, or tolerated by customers. it’s not a necessary specification, especially for this unnecessary price. the naivety is overpaying for crap and thinking it’s unavoidable.
have you seen these prices on these things? it’s disgraceful companies do it, even worse that buyers accept it.
It’s a painted finish. The areas that are peeling are exactly where you go to grab it if you pick it up. Look at the finish on anything subject to wear and tear and see if it is without blemish after 4.5yeard handling . Give me like an hour to get to the office and I’ll post a picture of a pair of focal elears that has had about 6hrs seated desk use, every day, since they were bought for daily use in 2016/17.
Tldr - wear and tear is individual use case. Op has had snaps, chips etc but given zero context of use, so this witch-hunt circle jerk you’re all jumping on is pretty naive.
Atleast use like a few layers of painting or atleast a more durable paint, I mean its sprayed on a pure black plastic background so when marks do appear they really noticable. Ive always handled these like a baby they look like snaps,chips on the corners but theyre not, its just the paint that came of and gives it that look in the corners.
which are solid plastic, not painted, correct?
most do on all headphones to varying degrees depending on what you’re doing to them. once its sat on your actual head are they doing it cos neither my focal elears or utopias do it on my head. the last lot of hd600’s i had creaked if you twisted them enough.
hd600 creak site:www.reddit.com
gives 715 threads.
yes and no, imo. you’re 4.5 years in so yes. i would not expect anything painted onto another non porous surface that is subject to manual handling to be issue free after 4.5 years. if this happened within a few weeks or months, then absolutely not ok.
out of interest, how did they? what action caused the snap cos that would certainly piss me off.
camera isn’t really picking up the minor scratches and scuffs. but these headphones literally go on my head for 6hrs, then are placed down much as they are in the pictures until they’re next used. they’re not painted so they’re nothing to chip.
https://imgur.com/a/ZwgKr3M
The creaking isnt my biggest issue with them. The cables itself just felt cheaply made and would tangle constantly. So its been like 4 years that i’ve been using a custom cable and never looked back since. You have the Focal Elear so it seems theyre not painted as I cant see any chips… Its not like I have much knowledgde on how these headphones are built, but why would you use black plastic earcups and put a layer of silver paint over them. I have no clue how they sprayed these. But wouldnt it be wise to first give them like a primer layer and then like 2 finished layers? So its atleast thicker and harder to break down? Cuz the coat on this is like 1/10th of a mm. I just think they’ve could done better at that area. I might be mistaken but who knows… I will still rock them. Im not trying to sound like a jerk.
oh i thought you meant the actual connectors snapped, not the cable. they should do better yes and i’m guilty of just accepting that cables that are supplied by certain manufacturers are just shit cos they know the buyer will just use their own cable.
i hope someone else can chime in here as i think this might be wrong, but i think the thicker the layer of paint, the more likely you are to get cracking and then chips forming?
ideally focal should have made their own plastic cup in the colour they wanted instead of just painting the existing parts. so that’s a compromise i’d hope to not see on a premium product.
Yeah fully agree here, with the resources they have they should’ve done better. Especially on the cups.
ionized and painted according to Sennheiser
wouldn’t have guessed that. makes the focals look very dogshit finish wise then, for sure.
it’s shouldn’t be a painted finish. everything is subject to wear and tear. it’s also subject to design and engineering. that’s why it shouldn’t be used by makers, or tolerated by customers. it’s not a necessary specification, especially for this unnecessary price. the naivety is overpaying for crap and thinking it’s unavoidable.
Are you expecting them to defy Science and create new chemicals or something?
use different materials. it’s that simple. they have a big enough budget.
I have 20 years old $100 AKG that do not have that kind of problem. They use plain colored plastic and metal finish. Why use paint…