Windows will not boot with this method. By renaming the file back to bootmgfw.efi windows will boot again but now linux won’t boot. There is no clean solution, other than switch to different computer that doesn’t have this issue. Because of issues like this I don’t recommend dual booting. Installing only Windows or only Linux is more manageable for not-tech-savvy people.
In windows EFI partition, there will be an EFI/Microsoft/bootmgfw.efi file, I usually rename it to bootmgfw.efi.bak and that allows grub to load.
I have observed that many laptops are hard-coded to boot windows whenever possible. Even with windows bootentry missing, firmware will skip Grub set to first priority and start windows. Only way to make them start Grub is to rename bootmgfw.efi to a different name.
Testcontainers uses ‘ryuk’ to clean up containers and it needs docker socket mounted within its container to work. So if you had any hardening config that prevents the docker socket access within a container e.g user namespace or SELinux then Testcontainers doesn’t work.
And I think it would be nice if Testcontainers ‘just worked’ with Podman without any additional steps.
Nothing else. Though docker socket issue was important enough.
You have to practice switching between neovim and other editors.
You have forgotten how to use a normal editor. I am not making it up, it is a real phenomenon. Similar to when SmarterEveryDay learned to ride a backwards bicycle he forgot how to ride a normal bicycle and essentially had to re-learn it. You have to re-learn how to use a normal editor.
For me the value of podman is how easily it works without root. Just install and run, no need for sudo or adding myself to docker group.
I use it for testing and dev work, not for running any services.
It’s the same picture.
Yes it is the ratings on winehq, https://appdb.winehq.org/
And yes, an average user probably going to fire a game, figure out it is not working, and promptly go back to windows, which makes that data less accurate, but what can we do about it?
The left axis is total number of ratings of each type (Garbage, Bronze, Silver, Gold, Platinum) in a given month (not per app). For example for month 2016-07 there were
"Garbage" => 22
"Bronze" => 14
"Silver" => 13
"Gold" => 55
"Platinum" => 61
On right side is the average rating. So if I assign values to each rating:
"Garbage" => 1
"Bronze" => 2
"Silver" => 3
"Gold" => 4
"Platinum" => 5
I can get an average rating, which will be between 1 to 5.
((22*1) + (14*2) + (13*3) + (55*4) + (61*5)) / (22 + 14 + 13 + 55 + 61)
~= 3.721
Technically, containers always run in Linux. (Even on windows/OS X; on those platforms docker runs a lightweight Linux VM that then runs your containers.)
And I wasn’t even using Docker.
How I lost a Postgres database:
I don’t know either, but from what I know, bureaucracy and corruption is often a result of bad organizational structure. Some “designated officer” raises a finger which gets approved by the Secretary who is appointed by the minister who is appointed by the PM who is nominated by the Lok Sabha, and we lose yet another privacy protecting service. I think we should have more direct control in these matters.
For now, if we cannot expect a proper functioning web, they cannot expect stability under their seats. Vote them out.
They never will, we have to vote them out.
Just did some basic testing on broadcast addresses using socat, broadcast is not working at all with /32 addresses. With /24 addresses, broadcast only reaches nodes that share a subnet. Nodes that don’t share the subnet aren’t reachable by broadcast even when they’re reachable via unicast.
Edit1: Did more testing, it seems like broadcast traffic ignores routing tables.
On 192.168.0.2, I am running socat -u udp-recv:8000,reuseaddr - to print UDP messages.
Case 1: add 192.168.0.1/24
# ip addr add 192.168.0.1/24 dev eth0
# # Testing unicast
# socat - udp-sendto:192.168.0.2:8000 <<< "Message"
# # Worked
# socat - udp-sendto:192.168.0.255:8000,broadcast <<< "Message"
# # Worked
Case 2: Same as above but delete 192.168.0.0/24 route
# ip addr add 192.168.0.1/24 dev eth0
# ip route del 192.168.0.0/24 dev eth0
# # Testing unicast
# socat - udp-sendto:192.168.0.2:8000 <<< "Message"
2024/02/13 22:00:23 socat[90844] E sendto(5, 0x5d3cdaa2b000, 8, 0, AF=2 192.168.0.2:8000, 16): Network is unreachable
# # Testing broadcast
# socat - udp-sendto:192.168.0.255:8000,broadcast <<< "Message"
# # Worked
Here is a trick that has been tried and tested over the years: Install another distro, and use that to install Arch. This way, you can rely on an already working linux distro till your Arch install works the way you want.
Hmm… Maybe I should adjust my priorities.
Never tried that, though a quick search got me this: https://superuser.com/questions/1471937/how-can-i-add-a-bcd-boot-entry-for-linux-in-windows-boot-manager-in-efi