ghost_laptop
Freedom is a synthetic enterprise, not a natural gift
- 35 Posts
- 62 Comments
Joined 4 years ago
Cake day: November 25th, 2020
You are not logged in. If you use a Fediverse account that is able to follow users, you can follow this user.
Ill try this, but i also cannot boot into Mint which is what i have on my usb. Also i didnt installed zorin bur rather just added the harddrive from another pc for use and forgot to format it, ive been using ot for a while like this,l. Do you think this os still my issue?
Hey, I replaced the cable and everything seems to be working fine, thank you!
Hey, I replaced the cable and everything seems to be working fine, thank you!
I used journalctl -k -f and this is the output, I’ve also tried dmesg and smartctl and replied with the output on other comments, and all show some kind of I/O error, I guess I’m fucked or can it be because of a bad cable or something?
Apr 13 17:06:59 fedora kernel: sd 1:0:0:0: [sdb] tag#14 Sense Key : Illegal Request [current] Apr 13 17:06:59 fedora kernel: sd 1:0:0:0: [sdb] tag#14 Add. Sense: Unaligned write command Apr 13 17:06:59 fedora kernel: sd 1:0:0:0: [sdb] tag#14 CDB: Read(16) 88 00 00 00 00 00 39 dd 26 78 00 00 00 08 00 00 Apr 13 17:06:59 fedora kernel: I/O error, dev sdb, sector 970794616 op 0x0:(READ) flags 0x80700 phys_seg 1 prio class 2 Apr 13 17:06:59 fedora kernel: sd 1:0:0:0: [sdb] tag#15 FAILED Result: hostbyte=DID_OK driverbyte=DRIVER_OK cmd_age=3s Apr 13 17:06:59 fedora kernel: sd 1:0:0:0: [sdb] tag#15 Sense Key : Illegal Request [current] Apr 13 17:06:59 fedora kernel: sd 1:0:0:0: [sdb] tag#15 Add. Sense: Unaligned write command Apr 13 17:06:59 fedora kernel: sd 1:0:0:0: [sdb] tag#15 CDB: Read(16) 88 00 00 00 00 00 39 dd 26 b8 00 00 00 20 00 00 Apr 13 17:06:59 fedora kernel: I/O error, dev sdb, sector 970794680 op 0x0:(READ) flags 0x80700 phys_seg 4 prio class 2 Apr 13 17:06:59 fedora kernel: ata2: EH complete Apr 13 17:19:28 fedora kernel: ata2.00: exception Emask 0x50 SAct 0x400 SErr 0x30802 action 0xe frozen Apr 13 17:19:28 fedora kernel: ata2.00: irq_stat 0x00400000, PHY RDY changed Apr 13 17:19:28 fedora kernel: ata2: SError: { RecovComm HostInt PHYRdyChg PHYInt } Apr 13 17:19:28 fedora kernel: ata2.00: failed command: READ FPDMA QUEUED Apr 13 17:19:28 fedora kernel: ata2.00: cmd 60/00:50:38:e3:9d/01:00:39:00:00/40 tag 10 ncq dma 131072 in res 40/00:01:00:4f:c2/00:00:00:00:00/00 Emask 0x50 (ATA bus error) Apr 13 17:19:28 fedora kernel: ata2.00: status: { DRDY } Apr 13 17:19:28 fedora kernel: ata2: hard resetting link Apr 13 17:19:31 fedora kernel: ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 310) Apr 13 17:19:31 fedora kernel: ata2.00: configured for UDMA/33 Apr 13 17:19:31 fedora kernel: sd 1:0:0:0: [sdb] tag#10 FAILED Result: hostbyte=DID_OK driverbyte=DRIVER_OK cmd_age=3s Apr 13 17:19:31 fedora kernel: sd 1:0:0:0: [sdb] tag#10 Sense Key : Illegal Request [current] Apr 13 17:19:31 fedora kernel: sd 1:0:0:0: [sdb] tag#10 Add. Sense: Unaligned write command Apr 13 17:19:31 fedora kernel: sd 1:0:0:0: [sdb] tag#10 CDB: Read(16) 88 00 00 00 00 00 39 9d e3 38 00 00 01 00 00 00 Apr 13 17:19:31 fedora kernel: I/O error, dev sdb, sector 966648632 op 0x0:(READ) flags 0x80700 phys_seg 32 prio class 1 Apr 13 17:19:31 fedora kernel: ata2: EH complete
It’s extremely long so I just copied a bit, but I see some errors regarding the ata bus I think.
[52308.201967] I/O error, dev sdb, sector 1028431352 op 0x0:(READ) flags 0x80700 phys_seg 32 prio class 2 [52308.201989] ata2: EH complete [52308.289440] ata2.00: exception Emask 0x50 SAct 0x2 SErr 0x30802 action 0xe frozen [52308.289447] ata2.00: irq_stat 0x00400000, PHY RDY changed [52308.289449] ata2: SError: { RecovComm HostInt PHYRdyChg PHYInt } [52308.289452] ata2.00: failed command: READ FPDMA QUEUED [52308.289454] ata2.00: cmd 60/e0:08:38:86:95/00:00:04:00:00/40 tag 1 ncq dma 114688 in res 40/00:01:00:4f:c2/00:00:00:00:00/00 Emask 0x50 (ATA bus error) [52308.289459] ata2.00: status: { DRDY } [52308.289462] ata2: hard resetting link [52311.606437] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 310) [52311.663188] ata2.00: configured for UDMA/33 [52311.663205] sd 1:0:0:0: [sdb] tag#1 FAILED Result: hostbyte=DID_OK driverbyte=DRIVER_OK cmd_age=3s [52311.663209] sd 1:0:0:0: [sdb] tag#1 Sense Key : Illegal Request [current] [52311.663211] sd 1:0:0:0: [sdb] tag#1 Add. Sense: Unaligned write command [52311.663214] sd 1:0:0:0: [sdb] tag#1 CDB: Read(16) 88 00 00 00 00 00 04 95 86 38 00 00 00 e0 00 00 [52311.663216] I/O error, dev sdb, sector 76908088 op 0x0:(READ) flags 0x80700 phys_seg 28 prio class 2 [52311.663235] ata2: EH complete [52311.917439] ata2.00: exception Emask 0x50 SAct 0x100000 SErr 0x30802 action 0xe frozen [52311.917447] ata2.00: irq_stat 0x00400000, PHY RDY changed [52311.917449] ata2: SError: { RecovComm HostInt PHYRdyChg PHYInt } [52311.917452] ata2.00: failed command: READ FPDMA QUEUED [52311.917454] ata2.00: cmd 60/20:a0:40:5a:87/00:00:cd:01:00/40 tag 20 ncq dma 16384 in res 40/00:00:00:4f:c2/00:00:00:00:00/00 Emask 0x50 (ATA bus error) [52311.917460] ata2.00: status: { DRDY } [52311.917463] ata2: hard resetting link [52315.238437] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 310) [52315.283121] ata2.00: configured for UDMA/33 [52315.283137] sd 1:0:0:0: [sdb] tag#20 FAILED Result: hostbyte=DID_OK driverbyte=DRIVER_OK cmd_age=3s [52315.283141] sd 1:0:0:0: [sdb] tag#20 Sense Key : Illegal Request [current] [52315.283143] sd 1:0:0:0: [sdb] tag#20 Add. Sense: Unaligned write command [52315.283145] sd 1:0:0:0: [sdb] tag#20 CDB: Read(16) 88 00 00 00 00 01 cd 87 5a 40 00 00 00 20 00 00 [52315.283147] I/O error, dev sdb, sector 7743167040 op 0x0:(READ) flags 0x80700 phys_seg 4 prio class 2 [52315.283162] ata2: EH complete [52316.242431] ata2.00: exception Emask 0x50 SAct 0x10 SErr 0x30802 action 0xe frozen [52316.242437] ata2.00: irq_stat 0x00400000, PHY RDY changed [52316.242439] ata2: SError: { RecovComm HostInt PHYRdyChg PHYInt } [52316.242443] ata2.00: failed command: READ FPDMA QUEUED [52316.242444] ata2.00: cmd 60/08:20:70:7c:7c/00:00:41:00:00/40 tag 4 ncq dma 4096 in res 40/00:ff:ff:00:00/00:00:00:00:00/00 Emask 0x50 (ATA bus error) [52316.242450] ata2.00: status: { DRDY } [52316.242453] ata2: hard resetting link [52319.558438] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 310) [52319.619535] ata2.00: configured for UDMA/33 [52319.619551] sd 1:0:0:0: [sdb] tag#4 FAILED Result: hostbyte=DID_OK driverbyte=DRIVER_OK cmd_age=3s [52319.619554] sd 1:0:0:0: [sdb] tag#4 Sense Key : Illegal Request [current] [52319.619557] sd 1:0:0:0: [sdb] tag#4 Add. Sense: Unaligned write command [52319.619560] sd 1:0:0:0: [sdb] tag#4 CDB: Read(16) 88 00 00 00 00 00 41 7c 7c 70 00 00 00 08 00 00 [52319.619562] I/O error, dev sdb, sector 1098677360 op 0x0:(READ) flags 0x80700 phys_seg 1 prio class 2 [52319.619581] ata2: EH complete [52320.916451] ata2.00: exception Emask 0x50 SAct 0x8 SErr 0x30802 action 0xe frozen [52320.916456] ata2.00: irq_stat 0x00400000, PHY RDY changed [52320.916459] ata2: SError: { RecovComm HostInt PHYRdyChg PHYInt } [52320.916462] ata2.00: failed command: READ FPDMA QUEUED [52320.916463] ata2.00: cmd 60/20:18:78:6d:f0/00:00:3c:00:00/40 tag 3 ncq dma 16384 in res 40/00:00:00:4f:c2/00:00:00:00:00/00 Emask 0x50 (ATA bus error) [52320.916469] ata2.00: status: { DRDY } [52320.916472] ata2: hard resetting link [52324.238433] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 310) [52324.280862] ata2.00: configured for UDMA/33 [52324.280878] sd 1:0:0:0: [sdb] tag#3 FAILED Result: hostbyte=DID_OK driverbyte=DRIVER_OK cmd_age=3s [52324.280883] sd 1:0:0:0: [sdb] tag#3 Sense Key : Illegal Request [current] [52324.280886] sd 1:0:0:0: [sdb] tag#3 Add. Sense: Unaligned write command [52324.280889] sd 1:0:0:0: [sdb] tag#3 CDB: Read(16) 88 00 00 00 00 00 3c f0 6d 78 00 00 00 20 00 00 [52324.280891] I/O error, dev sdb, sector 1022389624 op 0x0:(READ) flags 0x80700 phys_seg 4 prio class 2 [52324.280915] ata2: EH complete [52324.315439] ata2.00: exception Emask 0x50 SAct 0x100000 SErr 0x30802 action 0xe frozen [52324.315445] ata2.00: irq_stat 0x00400000, PHY RDY changed [52324.315446] ata2: SError: { RecovComm HostInt PHYRdyChg PHYInt } [52324.315449] ata2.00: failed command: READ FPDMA QUEUED [52324.315451] ata2.00: cmd 60/08:a0:80:6d:f0/00:00:3c:00:00/40 tag 20 ncq dma 4096 in res 40/00:00:00:4f:c2/00:00:00:00:00/00 Emask 0x50 (ATA bus error) [52324.315457] ata2.00: status: { DRDY } [52324.315460] ata2: hard resetting link [52327.606435] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 310) [52327.667122] ata2.00: configured for UDMA/33 [52327.667141] ata2: EH complete [52328.442437] ata2.00: exception Emask 0x50 SAct 0x80000 SErr 0x30802 action 0xe frozen [52328.442443] ata2.00: irq_stat 0x00400000, PHY RDY changed [52328.442444] ata2: SError: { RecovComm HostInt PHYRdyChg PHYInt } [52328.442447] ata2.00: failed command: READ FPDMA QUEUED [52328.442448] ata2.00: cmd 60/00:98:90:6e:59/01:00:3d:00:00/40 tag 19 ncq dma 131072 in res 40/00:00:00:4f:c2/00:00:00:00:00/00 Emask 0x50 (ATA bus error) [52328.442453] ata2.00: status: { DRDY } [52328.442456] ata2: hard resetting link [52331.758435] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 310) [52331.778679] ata2.00: configured for UDMA/33 [52331.778697] sd 1:0:0:0: [sdb] tag#19 FAILED Result: hostbyte=DID_OK driverbyte=DRIVER_OK cmd_age=3s [52331.778701] sd 1:0:0:0: [sdb] tag#19 Sense Key : Illegal Request [current] [52331.778704] sd 1:0:0:0: [sdb] tag#19 Add. Sense: Unaligned write command [52331.778707] sd 1:0:0:0: [sdb] tag#19 CDB: Read(16) 88 00 00 00 00 00 3d 59 6e 90 00 00 01 00 00 00 [52331.778709] I/O error, dev sdb, sector 1029271184 op 0x0:(READ) flags 0x80700 phys_seg 32 prio class 2 [52331.778733] ata2: EH complete [52332.186438] ata2.00: exception Emask 0x50 SAct 0x2 SErr 0x30802 action 0xe frozen [52332.186445] ata2.00: irq_stat 0x00400000, PHY RDY changed [52332.186447] ata2: SError: { RecovComm HostInt PHYRdyChg PHYInt } [52332.186450] ata2.00: failed command: READ FPDMA QUEUED [52332.186452] ata2.00: cmd 60/90:08:a0:91:1b/00:00:3a:00:00/40 tag 1 ncq dma 73728 in res 40/00:01:00:4f:c2/00:00:00:00:00/00 Emask 0x50 (ATA bus error) [52332.186457] ata2.00: status: { DRDY } [52332.186461] ata2: hard resetting link [52335.502433] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 310) [52335.565114] ata2.00: configured for UDMA/33 [52335.565131] sd 1:0:0:0: [sdb] tag#1 FAILED Result: hostbyte=DID_OK driverbyte=DRIVER_OK cmd_age=3s [52335.565135] sd 1:0:0:0: [sdb] tag#1 Sense Key : Illegal Request [current] [52335.565138] sd 1:0:0:0: [sdb] tag#1 Add. Sense: Unaligned write command [52335.565140] sd 1:0:0:0: [sdb] tag#1 CDB: Read(16) 88 00 00 00 00 00 3a 1b 91 a0 00 00 00 90 00 00 [52335.565142] I/O error, dev sdb, sector 974885280 op 0x0:(READ) flags 0x80700 phys_seg 18 prio class 2 [52335.565162] ata2: EH complete [52335.733444] ata2.00: exception Emask 0x50 SAct 0x20 SErr 0x30802 action 0xe frozen [52335.733450] ata2.00: irq_stat 0x00400000, PHY RDY changed [52335.733453] ata2: SError: { RecovComm HostInt PHYRdyChg PHYInt } [52335.733457] ata2.00: failed command: READ FPDMA QUEUED [52335.733458] ata2.00: cmd 60/08:28:a0:91:1b/00:00:3a:00:00/40 tag 5 ncq dma 4096 in res 40/00:00:00:4f:c2/00:00:00:00:00/00 Emask 0x50 (ATA bus error) [52335.733462] ata2.00: status: { DRDY } [52335.733465] ata2: hard resetting link [52339.054437] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 310) [52339.092930] ata2.00: configured for UDMA/33 [52339.092948] ata2: EH complete [52339.311447] ata2.00: exception Emask 0x50 SAct 0x40 SErr 0x30802 action 0xe frozen [52339.311455] ata2.00: irq_stat 0x00400000, PHY RDY changed [52339.311457] ata2: SError: { RecovComm HostInt PHYRdyChg PHYInt } [52339.311461] ata2.00: failed command: READ FPDMA QUEUED [52339.311462] ata2.00: cmd 60/00:30:00:fa:06/01:00:0b:00:00/40 tag 6 ncq dma 131072 in res 40/00:00:00:4f:c2/00:00:00:00:00/00 Emask 0x50 (ATA bus error) [52339.311469] ata2.00: status: { DRDY } [52339.311472] ata2: hard resetting link [52342.630429] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 310) [52342.636897] ata2.00: configured for UDMA/33 [52342.636913] sd 1:0:0:0: [sdb] tag#6 FAILED Result: hostbyte=DID_OK driverbyte=DRIVER_OK cmd_age=3s [52342.636917] sd 1:0:0:0: [sdb] tag#6 Sense Key : Illegal Request [current] [52342.636919] sd 1:0:0:0: [sdb] tag#6 Add. Sense: Unaligned write command [52342.636922] sd 1:0:0:0: [sdb] tag#6 CDB: Read(16) 88 00 00 00 00 00 0b 06 fa 00 00 00 01 00 00 00 [52342.636924] I/O error, dev sdb, sector 185006592 op 0x0:(READ) flags 0x80700 phys_seg 32 prio class 2 [52342.636947] ata2: EH complete [52342.831443] ata2.00: exception Emask 0x50 SAct 0x2000 SErr 0x30802 action 0xe frozen [52342.831450] ata2.00: irq_stat 0x00400000, PHY RDY changed [52342.831453] ata2: SError: { RecovComm HostInt PHYRdyChg PHYInt } [52342.831458] ata2.00: failed command: READ FPDMA QUEUED [52342.831461] ata2.00: cmd 60/00:68:68:a5:1b/01:00:39:00:00/40 tag 13 ncq dma 131072 in ``
It’s a bit long but here it is.
smartctl 7.4 2023-08-01 r5530 [x86_64-linux-6.7.11-200.fc39.x86_64] (local build) Copyright (C) 2002-23, Bruce Allen, Christian Franke, www.smartmontools.org === START OF INFORMATION SECTION === Model Family: Toshiba X300 Device Model: TOSHIBA HDWE140 Serial Number: 41IUK67JFBRG LU WWN Device Id: 5 000039 abc58066c Firmware Version: FP1R User Capacity: 4,000,787,030,016 bytes [4.00 TB] Sector Sizes: 512 bytes logical, 4096 bytes physical Rotation Rate: 7200 rpm Form Factor: 3.5 inches Device is: In smartctl database 7.3/5528 ATA Version is: ATA8-ACS (minor revision not indicated) SATA Version is: SATA 3.0, 6.0 Gb/s (current: 1.5 Gb/s) Local Time is: Sat Apr 13 17:09:03 2024 -03 SMART support is: Available - device has SMART capability. SMART support is: Enabled === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED General SMART Values: Offline data collection status: (0x80) Offline data collection activity was never started. Auto Offline Data Collection: Enabled. Self-test execution status: ( 0) The previous self-test routine completed without error or no self-test has ever been run. Total time to complete Offline data collection: ( 120) seconds. Offline data collection capabilities: (0x5b) SMART execute Offline immediate. Auto Offline data collection on/off support. Suspend Offline collection upon new command. Offline surface scan supported. Self-test supported. No Conveyance Self-test supported. Selective Self-test supported. SMART capabilities: (0x0003) Saves SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. General Purpose Logging supported. Short self-test routine recommended polling time: ( 2) minutes. Extended self-test routine recommended polling time: ( 481) minutes. SCT capabilities: (0x003d) SCT Status supported. SCT Error Recovery Control supported. SCT Feature Control supported. SCT Data Table supported. SMART Attributes Data Structure revision number: 16 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE 1 Raw_Read_Error_Rate 0x000b 100 100 050 Pre-fail Always - 0 2 Throughput_Performance 0x0005 100 100 050 Pre-fail Offline - 0 3 Spin_Up_Time 0x0027 100 100 001 Pre-fail Always - 464 4 Start_Stop_Count 0x0032 100 100 000 Old_age Always - 11263 5 Reallocated_Sector_Ct 0x0033 100 100 050 Pre-fail Always - 0 7 Seek_Error_Rate 0x000b 100 100 050 Pre-fail Always - 0 8 Seek_Time_Performance 0x0005 100 100 050 Pre-fail Offline - 0 9 Power_On_Hours 0x0032 073 073 000 Old_age Always - 11051 10 Spin_Retry_Count 0x0033 253 100 030 Pre-fail Always - 0 12 Power_Cycle_Count 0x0032 100 100 000 Old_age Always - 11259 191 G-Sense_Error_Rate 0x0032 100 100 000 Old_age Always - 8 192 Power-Off_Retract_Count 0x0032 083 083 000 Old_age Always - 8637 193 Load_Cycle_Count 0x0032 099 099 000 Old_age Always - 11332 194 Temperature_Celsius 0x0022 100 100 000 Old_age Always - 38 (Min/Max 16/59) 196 Reallocated_Event_Count 0x0032 100 100 000 Old_age Always - 0 197 Current_Pending_Sector 0x0032 100 100 000 Old_age Always - 0 198 Offline_Uncorrectable 0x0030 100 100 000 Old_age Offline - 0 199 UDMA_CRC_Error_Count 0x0032 200 253 000 Old_age Always - 0 220 Disk_Shift 0x0002 100 100 000 Old_age Always - 0 222 Loaded_Hours 0x0032 073 073 000 Old_age Always - 11003 223 Load_Retry_Count 0x0032 100 100 000 Old_age Always - 0 224 Load_Friction 0x0022 100 100 000 Old_age Always - 0 226 Load-in_Time 0x0026 100 100 000 Old_age Always - 545 240 Head_Flying_Hours 0x0001 100 100 001 Pre-fail Offline - 0 SMART Error Log Version: 1 No Errors Logged SMART Self-test log structure revision number 1 No self-tests have been logged. [To run self-tests, use: smartctl -t] SMART Selective self-test log data structure revision number 1 SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS 1 0 0 Not_testing 2 0 0 Not_testing 3 0 0 Not_testing 4 0 0 Not_testing 5 0 0 Not_testing Selective self-test flags (0x0): After scanning selected spans, do NOT read-scan remainder of disk. If Selective self-test is pending on power-up, resume after 0 minute delay. The above only provides legacy SMART information - try 'smartctl -x' for more
72·7 months agoAnglo proprietary ones are just the same shit, racist fuck.
Another scenario, you are a us citizen and they lock you in for exposing your fascist country’s war crimes
I tried to read you in goofld faith but the moment you basically said the dev shouldn’t be able to have a side project, or a life for that matter, because they should be working for you to get the feature you want is unforgivable. It is libre software, you are free to contribute and add it yourself. Value others’ work, you entitled fuck.
9·9 months agoYou still need a terminal emulator capable of displaying images, though, right? Like Kitty, Allacrity won’t do the trick.
ASUSTeK COMPUTER INC. P8H61-M LX3 R2.0 Intel i3-3220 (4) @ 3.300GHz NVIDIA GeForce GT 640 Rev. 2
That’s my hardware
I honestly rather not install nouveau since iknow it can cause issues and i wouldnt mind installing nvidias proprietary drivers if it makes it work since its not even for me
do you know if i should install the 470xx or the one just called nvidia drivers in the app store?
ill give it a try to the rest tho, thanks!
Not this time it seems.
Yeah, recently after posting this I went down a rabbit hole and found out about zsh and fish and I kind of like fish so I’m thinking about going straight to that, what a hard choice.
I think I maybe phrased it horribly, my question was more like, what do I need to learn in order to modify myself the .bashrc by myself instead of using a programme. Does it make sense?
I think I maybe phrased it horribly, my question was more like, what do I need to learn in order to modify myself the .bashrc by myself instead of using a programme. Does it make sense?
I was trying to do that but I’m unsure what to edit to do that, since most tutorials are using either a Debian based or Arch distro.
I was using a similar guide, and it also talked about the locale.gen, but that file was never to be found, I just searched a bit more into that and this popped up. So it seems Fedora handles things differently, but now I’m unsure what commands to execute since I’m not sure the ones in that thread are also valid for me.
Well, in Firefox’s settings there’s an option to use my own fonts instead of the web site, so I don’t think it’s related to anything like that, but rather some setting within the OS, related to locale config files.
I think it’s pure luck what font does your OS prefer, I was using Pop_OS and it defaulted to Japanese, but I think it’s more common to default to Chinese because of the population size.
I was using a similar guide, and it also talked about the locale.gen, but that file was never to be found, I just searched a bit more into that and this popped up. So it seems Fedora handles things differently, but now I’m unsure what commands to execute since I’m not sure the ones in that thread are also valid for me.
I managed to boot from the USB stick while running Mint in compatibility mode. I assume that if i burn and reinstall hopefully everything would be good if the hardware is working. Maybe I could fix it but I have no idea how to know whats wrong.