Hopefully this means coreboot support finally.

Doesn’t Windows 10 already do that? I could never get the freaking thing to leave my files behind and disable itself.

Windows 10 LTSC for the win if you have software you can’t yet abandon.

Isn’t the Banana Pi R64/R3/R4 close enough to that?

FYI the open source OpenWRT based Banana Pi R3 AX 4x4 is a thing. Don’t buy closed source Routers/APs on purpose.

Every time someone writes x.com I immediately think they’re talking about a porn site. What a shit rebrand. Or what a perfect name I guess?

My solution is RAIDZ5 and storing the backup on LTO6 tape with parity/erasure code. I think the fact that scrub times take 24 hours even on 16TB drives is already over the safety margin. If a drive failure happens, the first thing I’ll do to run a manual diff backup which should take a fraction of the time and then run the ZFS resilver.

I’m beginning to see why SSD RAID is being considered now. My guess for HDDs in enterprise is that a RAID 15 (I made this up) would be considered. What I mean is data is stored on two identical servers each running RAID5 or 6. Off the shelf solutions like Gluster exist and that seems to be gaining traction at least according to Linus Tech Tips.

If your computer is incapable of even running Ubuntu. Then I don’t think it’s worth using.

Cool. So you can no longer turn your phone off.

You know what’s funny. I was investigating the hardware datasheets for the PinePhone and looking at the RTC module and just like PC RTC chips there is an option to trigger an interrupt/power on when a certain time is met. That means that there appears to be no reason this couldn’t be a current feature on probably all modern smartphones. Just lack of software support.

You would surprised how much control a fearmongering narcissist can have over you. And I’d argue, most christian conservative are narcissists.

Yeah. All the cool kids are doing it. Like Tom Cruise.

There is one on the Wikipedia page.

https://en.wikipedia.org/wiki/DVD-RAM

https://upload.wikimedia.org/wikipedia/commons/2/24/DVD-RAM_FUJIFILM_disc_removable_without_cartridge_locking_pin.jpg

Due to the caddy nature I believe there were plans or limited availability of double-sided disks. That would have made it so much more appealing I think.

Yea but the tape is likely to last the 20-30 year estimate. You couldn’t say the same about HDDs especially the helium sealed ones.

Whether the tape drive will survive as well is another question but between the simpler mechanism, a drive 2 generations ahead can still read the tape, parts inter-compatibility if you needed to frankenstein an older drive with new rollers and motors and just plain buying and keeping drives sealed in storage as new-old-stock ahead of time. You have a few options to choose from.

Where as with HDDs you may have to repair each one. The helium ones you may have to re-gas.

Tape sounds like a better long term archival/backup approach.

Believe it or not, first gen DVD-RAM came exactly like this. But manufacturers cheaped out / wanted the drives to be more easily compatible with CDs. So the caddys were scrapped.

And then unsolved as of late by manufacturers cheaping out.

I have the Valve Index and my game plan is that I have a soldering iron and the Aliexpress link ready to go. I have not owned it long enough to know how good or bad the life span is yet though. Just based off the rumors I looked into how to get the stick replacement before buying.

Where do I get the keyboard as a part from? I bought a keyboard from a seemingly branded seller on Aliexpress and the keyboard was really shit. The spacebar didn’t balance at the edges and all the key felt mushy.

I also bought a battery from iFixit and got two warranty replacements and not a single one lasted more than a few hours before bricking itself. As in the battery still measured a voltage and it could keep the ram contents in sleep but the controller/battery info no longer showed up in macOS.

I can do these repairs as difficult as they are but where do I actually get the parts from?

I suppose I hadn’t considered nor know much about slideloaded solutions as my previous phone was an iPhone 5c. It was a handmedown from my parents.

I don’t really like the lack of hardware support on the Android side (parts availability). Not exactly like it’s much better on the iPhone side either. So I went with the PinePhone. Linux on there is very barebones but at least the parts are available. If I am going to use my phone in a barebones manner then why buy in to an expensive fixed life device?

Not exactly a knowledgeable user. Just another user frustrated by the subscription/throwaway economy. I realize this wasn’t really a relevant answer to your question but more how I adapted to the worthless app store.

BTW, one of the few apps I did purchase was 1Password. $60 for the Mac app and $40 for the iOS app. So $100 all in all. Those ass hats switched to subscription only the very next version citing we need funds to further develop the security. That plus a couple other examples is why I gave up on paid proprietary software on both devices. I’m full force trying to find FOSS solutions instead. Not that many exist for mobile or even desktop as you have also discovered.

The answer is that app stores are designed to rake users over the coals for all the money they can. Part of the reason I have never made my phone the center of my computing. It’s too expensive and crap of an experience. I have just always made a habit of carrying around my laptop almost everywhere. I have an old phone (now PinePhone) for calls, texts, music, basic web browsing and internet tethering for the laptop.

Have you considered the PinePhone (Pro)?