Fair enough. Is there anything one can do to mitigate? Like I know for the recent issue in the news, a mitigation strategy for consumers is to basically reboot their router often. I keep my router and all hardware up to date, and try to follow news here. Not sure if there is really anything else I could do.
Oh wow, hard to believe a huge bug like that would make it to production. What do you recommend instead? Stick with TP-Link?
From what I’ve seen it seems consumer routers, but it raises flags is all, and makes me reconsider options.
So I just added a TP-Link switch (TL-SG3428X) and access point (EAP670) to my network, using OPNSense for routing. I’m still within the return window for both items. I understand the article mentions routers, but should I consider returning these, and upping my budget to go for ubiquity? The AP would only be like $30 more for an equivalent, so that’s negligible, but a switch that meets my needs is about 1.6x more. And still only has 2 SFP+ ports, while I need 3 at minimum.
Sure could. Unfortunately, those trains don’t run between my home and work, or grocery store, or doctor and hospital, or movie, or the mountains for skiing/camping, or any other amenities where I live. I wish I had great public transit options like in Europe, but I don’t.
Now that’s a great looking car. Could never afford it, but it’s great nonetheless.
I’ll give that a shot, thanks!
Thanks for the detailed reply.
So the command gives me an error that nfs-client cannot be found.
The fstab just has basic default config. No timeout set.
I considered network issues, though it seems to be quite stable for other services. Not ruling it out just yet. I have a new switch coming in the next week, so will test if the issue persists when I put that in.
I will also give autofs a shot.
Thanks!
Haha don’t cut it up just yet! I’ll try some of the other options suggested here, as I’d like to learn what the issue is. The worst case I’ll try smb.
Thank you, will try this when I have time later this week.
They are mounted via the gui, but it just puts the mount into fstab. I checked the config there and it is just the standard default options for an nfs mount.
Edit: and no, I don’t lose it on reboot. Reboot re-mounts the share correctly.
Through the Cockpit gui, which just puts it into fstab. I checked the fstab config and it just has the basic default settings.
Doesn’t seem like it as far as I can tell.
Ya you’re right some of their views are 👎. I actually stopped listening to the podcast sometime over the pandemic when they had a super right wing guest on and they let loose and agreed with his views which was uncommon. Didn’t finish the episode, but came back to it a few years later and I recall hearing Aaron back track. Some of their newer episodes are still interesting and they seem to be more balanced, though I’ve been listening to the pre pandemic episodes.
For me Mysterious Universe takes the cake. A couple of Aussie guys talking about anything and everything paranormal, big foot, lucid dreaming, missing 411, stone tape theory, mediums, hauntings, abductions, time travel, ufos, men in black, remote viewing, alternative history theories, etc. They don’t really delve into conspiracy theories which I appreciate.
They’ve been at it for ages, and they are on season 32 of the regular show and 30 of the plus show (2 seasons per year). Most shows they discover a book or essay and do a deep dive into it, explaining and linking it to other research.
My main draw is how they don’t take anything too seriously, and are able to objectively present a theory about “black ops stealth [person of short stature]”, mixed with “the meaning behind your Thai diving instructor’s tramp stamp”, and follow it by well researched interviews with authors and researchers. Giving facts and letting listeners draw their own conclusions.
All that to say, I’ve listened back to season 11 so far, and have thousands of hours of content. Highly recommend.
Similar situation here. Lots of ghosting, or unmatching the day of a scheduled date. Had two dates in the last few months of using the apps. First woman was about 15 years older than her pics. Not unattractive by any means, but felt lied to from the get go. The other, let’s just say she had some work done after most recent pics, and the surgeon shouldn’t be practicing.
Yeah it’s definitely an apples to oranges comparison, especially since the CRA does tax (federal and provincial/territorial) as well as benefits, while all the others are just federal tax. And agreed the IRS is way underfunded and understaffed.
I went on a bit of a deep dive and looked at the CRAs report cards and departmental plans. Lots of neat information there for 2022-23 fiscal year (not sure why that was in a plan for next year, but interesting stats nonetheless)
There was also a tidbit about tax cheats specifically, and $14.3B coming from that alone, which is $1.2B more brought in, than they spent. Not bad.
As a result, the CRA has increased its ability to identify and target aggressive tax planning, and increased the volume of its gross audit reassessments. A total of 62,660 audits, excluding all other compliance interventions were completed in 2022–23 which had a fiscal impact of $14.3 billion.
Well said. I will just add that the major distinction as someone else pointed out is that the CRA handles all the taxes for provinces, not just federal, and also administers benefits, which make up a large portion of its funding and staff.
I was curious and looked up their report card for last year CRA 2022-23 departmental results, and I’m not sure where this article got some of its information, but it’s quite a bit off, and doesn’t mention published info (at least not in the non-paywalled section).
There is a good table that shows money spent and employees, as well as explanations for the major increase for last fiscal and the major upcoming decreases. TL;DR: major new benefits and changes require employees.
The increase in actual FTEs in 2022–23 is largely attributable to the administration of measures announced in the 2021 and 2022 federal budgets and economic statements as well as those associated with addressing the post-pandemic sustainability of CRA contact centres and the administration of the one-time top-up to the Canada Housing Benefit and the interim Canada Dental Benefit. Over the planning period, the reduction in FTEs from 50,195 in 2023–24 to 47,631 in 2024–25, is primarily as a result of a decrease or sunsetting of funding to implement and administer various measures announced in the federal budgets and economic statements as well as those associated with the COVID-19 pandemic.
To your last point on comparing the CRA to other taxation authorities, some months ago I went down a rabbit hole and I found something like this on the OECD website, but can’t seem to find it now, so I will just link the main page. It wasn’t a comparison between tax administrations per se, but it was a short summary of each country’s stats, how much money they bring in, spend, where they fit globally, employee counts, etc. You could then compare to others yourself. Very informative, and according to those stats, CRA was near the top IIRC.
I actually tried this as my second step in trouble shooting, the first being using different ports.
In the non-omada management software, it defaults to 10G, and if the devices is on before the switch it negotiates 10G correctly and works at full speed (tested with iperf3). As soon as any of the 10G connected devices is rebooted, I’m back to 1G. To fix it, I then have to set the port to 1G with flow control on, apply changes, save config, refresh page, change to 10G with flow control off, apply, save config and it goes back to 10G again. Alternatively I can reboot their switch and it’s fine again.
In Omada its the same, fewer steps to get there but I have to sometimes do it 2-3 times before it works.
Same issue with both 10G TP-Link switches, so I’m thinking it might be the SFP. Using Intel SFP+ with FS optical cables. I’m using a DAC for the uplink from the 10G switch to my unmanaged 2.5G switch, and that doesn’t have the problem of dropping, always works max speed.