NY bill would require a criminal history background check for the purchase of a 3D printer::Requires a criminal history background check for the purchase of a three-dimensional printer capable of creating firearms; prohibits sale to a person who would be disqualified on the basis of criminal history from being granted a license to possess a firearm.
I’d argue a cnc mill makes a hell of a better gun than a 3d printer
I’d fire a 3D printed gun with a string from about 20’ away.
It would, but it would also require more expense and skill and the “gun control is pointless because people will just make their own guns” lie works best when you can imply there is minimal cost, experience, effort and risk.
since a cnc is computer controlled it should be about as hard to learn to use a 3d printer
making the model and instructions for the cnc may be more complicated, but you can share those
Your gut feelings are not facts. CNC machining – especially of hard metals and complex shapes – is significantly more complicated and expensive than desktop 3D printers.
You can’t just buy a $200 CNC frame, stick a palm router in it and come back an hour later to an AR-15.
Not that you’re saying otherwise, but it’s not anywhere that simple to make a gun on a 3d printer either. It’s at least not considerably easier than making one clandestinely using any of the myriad options that have existed without 3d printing.
There are companies that sell small CNC machines marketed for the purpose of producing firearms. At that point all you need is the gcode and the stock.
Sounds like you shouldn’t have any problem answering these questions then:
Alternatively, you could go on record saying that absolutely none of those things matter for gun manufacturing.
All of the answers to these questions are easy, and they all begin with a G.
G-code answers most of your technical concerns.
Google could have helped you find your other answers.
And the Ghost Gunner is what I found:
https://ghostgunner.net/product/ghost-gunner-3-deposit/
Why so incredulous about something that is obviously possible?
What grade and type of metal is required for a gun? GCode.
Best of luck with your gun.
I’m aware it’s possible to CNC gun parts and have never claimed otherwise. But isn’t it just fascinating how all the people insisting its how easy and cheap it is have never actually machined anything?
It’s entirely possible the linked product comes with instructions on what material to put in the machine. It’s entirely possible they might even sell the required material.
Based on the reviews and videos of the product your skepticism is unwarranted. You’re just being a dick.
So the big thing people, including lawmakers, whiff on this is you dont actually 3d print guns. You can 3d print superficial parts like the grip and whatnot, but the actual firing part of the gun is largely not 3d printable.
You can print it, and people have tried, but it usually only lasts 1-2 rounds before it breaks.
However, what you can print that is a huge deal, is the very precise jigs necessary to very easily manufacture the firing mechanisms of the gun, to quite a degree of precision. Then you use a drill or whatever to actually make those metal parts.
Basically, you can easily 3d print a gun maker, and then 3d print all the “extra” parts like grip and whatnot that attach to what you have created, in order to improve it.
Thats the actually serious part, because normally these sorts of jigs need to be extremely precise and are quite difficult to get ahold of. You need a fairly high end CNC machine to make one, or you have to buy it.
But 3d printers, even fairly affordable ones, when fine tuned by hand, do have the necessary precision to print such jigs, which makes them much more accessible for quite cheap… And once you print the jig, it becomes pretty easy to mass produce DIY guns.
People have been making paper templates for a long time, I can’t see how plastic would have any real advantage. A plastic guide isn’t going to constrain a metal cutting tool, at best it just shows you where you need to drill the same as a paper template. If you wander outside the lines you’ll just mess up both the part and the jig.
If I were to set up a clandestine gun manufacurer I would try and design a product that could be made using mostly aluminum extrutions and paper jigs. That way it’s easy to compartmentalize each step, harder for one guy to flip on you, and fast/cheap. Plus if you get raided you don’t have a bunch of incriminating files cached on your CNC machine from previous runs.
It’s a lot more complicated than that. We are talking a lot more than just “guides” when it comes to these types of jigs. Adapters and entire jigs that require a bunch of common parts you can by at the hardware store + the plastic parts to assemble.
Think more like creating bespoke fairly precise CNC stuff to adapt a drill or router. It’s a lot more advanced than just paper guides, because 3d printers are for all intents and purposes CNC machines themselves.
Sure, but you still need to buy the actual firing mechanism parts of real guns in order to manufacture “3d printed guns”.
And you can also make those same jigs and fixtures out of wood or any other raw material.
Nah thats the parts the jigs make, as well as a couple other key pieces that require higher than usual precision. At least, if you want to actually make a gun that can reasonably hit a target.
Not by hand with the precision needed, not for the parts in question. Unless you want to risk a misfire and losing a finger.