This is exactly what my Brother MFC did and I also put some tape on the window to extend the cartridge life. The problem is that it still went through “cleaning cycles” every few days, in which it will dump a bunch of ink into a big sponge hidden inside the printer (I took it apart after it broke). It will eventually run out ink even if you don’t use it because of that. And if you keep it unplugged to stop it from doing that it will eventually dry up and clog up. Even worse, if you leave it plugged in with tape on the cartridges and it tries to print with an actually empty cartridge, it will burn the printer head.
The absolute worst part is that you have zero control over when it did those cycles in which it would make all sorts of loud clunking and whirring noises and if it detected that an ink cartridge was low it would also beep loudly. It was in my bedroom at that time and it would wake me up in the middle of the night every time. I don’t care what people say about this company, I will never buy anything from it again.
The problem is that it still went through “cleaning cycles” every few days, in which it will dump a bunch of ink into a big sponge hidden inside the printer (I took it apart after it broke). It will eventually run out ink even if you don’t use it because of that. And if you keep it unplugged to stop it from doing that it will eventually dry up and clog up.
In other words, inkjet printers are inherently unsuitable for anybody who doesn’t need to print on a regular and consistent basis, but the initial purchase price of the hardware is cheaper so that’s what a lot of people who only need to print occasionally end up buying.
Here’s the catch: They’re not suitable for people who print frequently either because the cost per page is higher than laser. The only upside is the lower upfront cost but you very quickly make that difference in running costs no matter what your use is.
They’re only suitable for people who want high-quality color prints almost all the time, for things like photos and posters and banners, not just normal documents. The only inkjets that have a good reason to exist are the high-end ones mostly found at print shops and sign shops and the like; the cheap consumer ones are just e-waste from the moment they’re manufactured.
![[System32] No but like for real](https://lemmy.world/pictrs/image/7ac069c7-788b-4b40-ae8f-078b95a1c4a3.jpeg){kind=link}
This is exactly what my Brother MFC did and I also put some tape on the window to extend the cartridge life. The problem is that it still went through “cleaning cycles” every few days, in which it will dump a bunch of ink into a big sponge hidden inside the printer (I took it apart after it broke). It will eventually run out ink even if you don’t use it because of that. And if you keep it unplugged to stop it from doing that it will eventually dry up and clog up. Even worse, if you leave it plugged in with tape on the cartridges and it tries to print with an actually empty cartridge, it will burn the printer head.
The absolute worst part is that you have zero control over when it did those cycles in which it would make all sorts of loud clunking and whirring noises and if it detected that an ink cartridge was low it would also beep loudly. It was in my bedroom at that time and it would wake me up in the middle of the night every time. I don’t care what people say about this company, I will never buy anything from it again.
In other words, inkjet printers are inherently unsuitable for anybody who doesn’t need to print on a regular and consistent basis, but the initial purchase price of the hardware is cheaper so that’s what a lot of people who only need to print occasionally end up buying.
Here’s the catch: They’re not suitable for people who print frequently either because the cost per page is higher than laser. The only upside is the lower upfront cost but you very quickly make that difference in running costs no matter what your use is.
They’re only suitable for people who want high-quality color prints almost all the time, for things like photos and posters and banners, not just normal documents. The only inkjets that have a good reason to exist are the high-end ones mostly found at print shops and sign shops and the like; the cheap consumer ones are just e-waste from the moment they’re manufactured.