Tried just plugging it in and it was treated like a normal USB
turn off your computer, plug in the key, press the power button to turn it on, then immediately and repeatedly press your boot menu key, it’s probably of the f keys above the numbers on your keyboard, if you have an hp laptop it’s going to be f9 otherwise it’s often f12 but that can be any other one, try googling it, then you will have a menu appear which lets your select “usb something whatev” select it and press enter, if that doesn work, you’ll have to learn all about configuring your bios to run linux
From my experience: F2, F8, F9, F10, F12, Delete.
I always wondered why none of them could agree on which f key does what, especially when they all already agree that ctrl-alt-del restart the computer
Ctrl-alt-del was part of the IBM PC BIOS, which everyone cloned. There was no boot menu or configuration interface back then.
My Asus laptop is hold ESC. Need to start pressing it before or very shortly after the power button is pressed or the window is missed.
My problem is that secure boot blocks it. Ventoy plugson says “secure boot support enable”
Its not booting because of secure boot. How do I let it work in secure boot. I am using ventoy
alright that’s good, that means it’s seeing the key as bootable, you need to enter the bios config, same procedure, but it’s another f key, then you will find an option that’s called secure boot and you can change it from “enabled” to “disabled”, on some bios, you first need to erased the stored secure boot key first
I’m sorry but I don’t get what you mean. If I disable secure boot does my device get reset?
it shouldn’t reset your device, secure boot is only there to prevent someone from doing exactly what you’re trying to do, booting another os on the computer, that said, if you’re going to mess around with a linux installer without full knowledge of what you are doing you should absolutely back up your entire drive first, the easiest method being phisically removing the hard drive and putting another one in
How do I disable secure boot? Or at elast get my USB to run
in the bios config menu, you can access it when you start up your computer and spam the appropriate keyboard key, you can find out which key it is by the brand of the computer, or the brand of the motherboard if you assembled the pc yourself, then inside the bios config menu you will find the secure boot option.
for example, on my computer, I need to turn it off completely, then press the power button and quickly press the f2 key repeatidely, then instead of launching my operating system, it launches the bios config menu, and in that menu, under the “boot” section, I find a line called “secure boot” which I can enable and disable, once i’ve done so, I press f10 to save the configs I made, and boot my system where I want
OK, sorry but what does acer use? Also do I boot in normal mode or grub 2 because somehow I got in via ventoy
You dont need to disable secure boot, you just need to enroll the ventoy keys: https://www.ventoy.net/en/doc_secure.html
turn the pc off, plug the USB in, turn the pc on.
if that doesn’t work, look up how to enter your specific laptop’s BIOS settings. There, you should find the boot order menu to switch to booting from that usb.
this might help with secureboot. By the way, Googling your problem concisely (e.g. ventoy secureboot acer laptop) can help find solutions, or at least give you ideas to try before asking here.
