THERE’S NO LGBT WITHOUT THE [T]
🏳️🌈 lui/he/him 📍Bologna (IT)
💬 IT/EN
Arti visive, graphic design, videogiochi, astronomia, caffè, diritti LGBT, gatti e cose ignoranti
Nel tempo non libero faccio il grafico
Scrivo una tesi sull’onboarding al Fediverso, #TheFediGuide
Visual arts, graphic design, videogames, astronomy, coffee, LGBT rights, cats and silly stuff
In my busy time I’m a graphic designer
Writing a thesis about Fediverse onboarding, #TheFediGuide
Foto ❦ @fdrc_pf@pixelfed.social
@coffee@lemmy.world @coffee@a.gup.pe
ERRATA CORRIGE
Turns out I’m a little dumb and I read the K6 precautions incorrectly
RDT is not actually discouraged. They actually advice against spraying water directly on the metal parts of the grinder
Avoid spraying water directly onto any part of the grinder. You can perform RDT by spraying water on another object.
So there’s that. It is not so sensible to corrosion as I was firstly worried about. Yay
@PinGZ@infosec.pub never tried RDR, but I heard multiple times about that. I don’t think I’ll try it since the manufacturer explicitly advises against that technique, however I think I’d still prefer to clean it at least once a couple of days, so the hustle of assembly would remain. Fortunately seems like I’m getting used to it, they could have done better tho
@sinceasdf@lemmy.world to be honest, it seems like there’s not general consensus about which material works better, so my guess is that they may give different results but they’re both good depending on what you like.
I’d also add that the grinder itself might be more important as the overall build quality and stability might have a role in the quality of grinding, as someone suggested that Porlex performs worse not because of the burr itself but because it is not secured well enough so it has some play side to side.
But yeah, as I said I was still happy with that, even if it was generally less comfortable to use
@will_a113@lemmy.ml @coffee@a.gup.pe Until now I’ve always been using Porlex mini II, but sadly I broke the burr. I was pretty happy about it but I learned it is generally considered as an inconsistent grinder, so I looked for an upgrade in my setup and K6 seemed a good choice.
To be honest I did notice a certain range of dimension in the Porlex ground, but the resulting coffee always seemed good enough for me. I’m curious about the difference with the K6
About a.gup.pe, I’m using Sharkey to post, so I don’t really know if lemmy supports the following of users. I guess it’s not possible, since Guppe groups are technically bot accounts, Lemmy shouldn’t be able to see them as communities
@CCMan1701A@startrek.website isn’t 320ml a little too much? Didn’t it came out too watered?
@InternetCitizen2@lemmy.world that’s right, I’m just focusing on accounts boosting because it’s a very good way to discover people you wouldn’t see otherwise, as they may boost from networks outside your reach. And since communities speaking different languages can be more separated, that’s a good way to ho imho
@zabadoh@ani.social it’s not like the reality is less disturbing tho 🫠
@baronvonj@lemmy.world as far as I know, that number shows the number of shares. It is not an indication that you are seeing that post because it was boosted tho.
The thing is, if I follow a user and that user boosts a post from someone I’m not following, that post is supposed to show up in my TL, in the same way as any other Fediverse platform. However that doesn’t happen. I tested it: on Pixelfed home TL you only see posts from users you follow, you don’t see boosts of posts made by users you’re not following. And since the purpose of boosting is to let you know new people, that’s a really big bummer
@3dmvr@lemm.ee well this is a post from a Sharkey instance, I see your post because I follow this community (which appears to me as a user boosting lemmy posts)
Also I’ve already posted on lemmy directly from my instance, I just have to tag the community I want to post into, and I receive replies as well.
It’s not perfect but it’s extremely helpful and cool
@anytimesoon@feddit.uk well that’s impressive! Coincidentally I just ordered Hoffmann’s book so I guess it’s convenient pairing
@oreteau@lemmy.world cold brew stays fresh and good for days, I’d say a week at least, I guess you would probably need to worry about the safety factor before the flavour. However in the summer I usually make 1 liter and it get consumed in 4/5 days, but I think it can last more. Of course you need to keep the jar well sealed.
Note that after little time a thin white film starts forming on the surface. That’s totally normal and you shouldn’t worry about it, it is not mold (as it should need much more time to form) but some water and coffee minerals and residuals concentrating on top. It’s not aesthetically appealing but it’s totally safe.
@rglullis@communick.news I think is far more complex than that, but this:
In other worlds, does this mean that the only reason that the Fediverse is small is because it is not as addictive as the other social networks?
may be kinda true. Just think about how much time you spend on Instagram (if you use it) by actually talking/socialising vs how much time you just consume passively contents and ads. Chances are that the Fediverse is where most of your actual interactions take place. In this sense I really liked your comparison with unhealty food, however if quitting bad food habits means usually to improve your life, quitting social networks often means to cut relations to communities you may heavily rely on, especially if you are a memeber of a marginalised community. There is a whole history about black community trying Mastodon during the Twitter migration and mostly ditching it because the platform wasn’t so welcoming after all but mostly because the black community sticking to Twitter was just too important. Is only an example that shows that communities tend to stick together and move away mostly for cultural and historical reasons.
So as Gollum loved and hated the ring, communities hate and love their platforms, but most of all they love density. I think the Fediverse have a chance only if we stop using the commercial platforms as a paradigm and even if many users ditch the Fediverse after the first try, the most motivated of them choose to stay because the genuinely like it, and they may be enohght to form a dense enought user base that can motivate communities to form and stick here
@actionjbone@sh.itjust.works If I stick to the Porlex the tall could be my next step. The Mini is handy until you need to brew two cups or a liter of cold brew 🙃
@Imgonnatrythis@sh.itjust.works Actually I literally just did it after tasting a V60 coffee in a local cafe. I got a 150g bag of the same coffee (a really good Colombian) and I managed to obtain a cup almost as good as the one they served me, even if I’m using a stovetop kettle without termometer.
However my main doubt is about the setting of the grinder, mainly because I can calculate how many steps it needs to obtain a theorically correct size of the ground, however I mostly end up looking for instructions online and finding the right setting by trying
@rglullis@communick.news tbh we shouldn’t expect the adoption curve of any Fediverse software to be somewhat similar to the ones of centralised social networks, since Fediverse completely misses the commercial aspect that encourage key users to stay in the platform easing communities to stick to it as well. My guess is that without the action of commercial dynamics, the situation wouldn’t be so different from the jumps-and-losses moments we’re used to
@flamingos@feddit.uk when I post on a Lemmy community I always follow it first, so I should receive everything that is boosted in theory. For comparison, I do the same with Guppe groups and it works as you described (as long as the group is tagged)